LinkBack URL
About LinkBacksOK. So I am having a custom res made for my azza case.I need to know witch is the best thickness.
3/16 or 1/4''.
This is what the company want's to know before they start the build of my res.
|
|
| CPU: i7 980X |
| M/B: asus rampage black edition III |
| RAM: CORSAIR DOMINATOR PLATINUM 16GB 2133 |
| GPU: asus580 directcuIII 1536 MB GDDR5 / 782HZ OVERCLOCK |
|
|
3/16 or 1/4
OK. So I am having a custom res made for my azza case.I need to know witch is the best thickness.
3/16 or 1/4''.
This is what the company want's to know before they start the build of my res.
| CPU: Intel Core i7 3820 |
| M/B: Asus Sabertooth X79 |
| RAM: 32GB Corsair Vengeance (8x4GB Sticks) |
| GPU: Gigabyte GTX670 w/ XSPC Blocks (SLI) |
|
|
Re: 3/16 or 1/4
1/4", 3/16" is slightly thinner
| CPU: i7 980X |
| M/B: asus rampage black edition III |
| RAM: CORSAIR DOMINATOR PLATINUM 16GB 2133 |
| GPU: asus580 directcuIII 1536 MB GDDR5 / 782HZ OVERCLOCK |
|
|
Re: 3/16 or 1/4
Thank's.
| CPU: i7 920, 4.2Ghz HT |
| M/B: P6X58D Premium |
| RAM: OCZ Flex EX PC3-17000 12GB |
| GPU: Asus EAH5870 |
|
|
Re: 3/16 or 1/4
uh what's the material?
| CPU: i7 980X |
| M/B: asus rampage black edition III |
| RAM: CORSAIR DOMINATOR PLATINUM 16GB 2133 |
| GPU: asus580 directcuIII 1536 MB GDDR5 / 782HZ OVERCLOCK |
|
|
Re: 3/16 or 1/4
Acrylic.
| CPU: i7 920, 4.2Ghz HT |
| M/B: P6X58D Premium |
| RAM: OCZ Flex EX PC3-17000 12GB |
| GPU: Asus EAH5870 |
|
|
Re: 3/16 or 1/4
if it's bay res then I would go with 3/8" thick and make sure they use screw-inserts or you will be sorry when you mount it.
Re: 3/16 or 1/4
I'm gonna assume it's just a FrozenQ tube res. 3/16" is more than adequate for a tube res. 1/4" for a bay res.
FQ and IanDH are the only ones I know that do one-off reservoirs for folks, and I think Ian is too busy IRL these days. Or am I way off base here and you found another party that does customs? Lund might be a bit expensive for a one-off.
Posting Permissions
Reply With Quote
