sorry for the odd first post but Ive searched everywhere and cant find a similar isue and all my electrician friends havent responded. I am in the process of liquid cooling my case. I am setting up the radiator and the intention was to daisy chain the fans to have one lead power them. I finished one side and basically what i did was matched the 3 wires from each fan and put them in the end of a crimped butt splice, so obviouly there are 3 of these. Then on the other end of the splice i put the lead matching the same wires to the ones on the other end and crimped that. Now when I plugged it in to the 3 pin molex adapter coming from the psu that is powering the case fans all of the 3 fans light up but only 1 spins. I have tried it in the plug for 3 different fans all coming from the psu and not the motherboard which should supply more than enough power for 3 fans in a chain. any ideas?