LinkBack URL
About LinkBacksYes, there is a dial 1-5. I have it set about 3, if I set it to max I hear a whirling sound from the pump. Does the blue lead over ride the settings on the dial?
|
|
| CPU: Intel i7 2600K |
| M/B: ASUS P8Z68 Deluxe |
| RAM: G.Skill Ripjaws DDR3-1600 PC3-12800 |
| GPU: MSI N460GTX Hawk |
|
|
Re: XSPC Rasa 750 RX240
Yes, there is a dial 1-5. I have it set about 3, if I set it to max I hear a whirling sound from the pump. Does the blue lead over ride the settings on the dial?
| CPU: Intel Core i7 3820 |
| M/B: Asus Sabertooth X79 |
| RAM: 32GB Corsair Vengeance (8x4GB Sticks) |
| GPU: Gigabyte GTX670 w/ XSPC Blocks (SLI) |
|
|
Re: XSPC Rasa 750 RX240
No, The blue wire is so you can monitors the pumps RPM via your bios or if you have a program that can monitor the current CPU fan speed.
| CPU: Intel i7 2600K |
| M/B: ASUS P8Z68 Deluxe |
| RAM: G.Skill Ripjaws DDR3-1600 PC3-12800 |
| GPU: MSI N460GTX Hawk |
|
|
Re: XSPC Rasa 750 RX240
Got it.. So I would be better off connecting it to the Recon Fan Controller, right?Originally Posted by Solara2xb
| CPU: Intel Core i7 3820 |
| M/B: Asus Sabertooth X79 |
| RAM: 32GB Corsair Vengeance (8x4GB Sticks) |
| GPU: Gigabyte GTX670 w/ XSPC Blocks (SLI) |
|
|
Re: XSPC Rasa 750 RX240
No, The fan controller is not going to do anything. Put it on your CPU fan header on the MB.
The Fan controller is use to control the fans only. It won't give you any readings, the tach wire on the pump is for reading only.
| CPU: Intel i7 2600K |
| M/B: ASUS P8Z68 Deluxe |
| RAM: G.Skill Ripjaws DDR3-1600 PC3-12800 |
| GPU: MSI N460GTX Hawk |
|
|
Re: XSPC Rasa 750 RX240
Right, and with it connected to the Recon I get a display of the RPM's of the pump. (Since there is just the sense lead) I can watch it change as I adjust the dial, max is 5000 RPM. This way I can tell at a glance that the pump is working.
| CPU: Intel Core i7 3820 |
| M/B: Asus Sabertooth X79 |
| RAM: 32GB Corsair Vengeance (8x4GB Sticks) |
| GPU: Gigabyte GTX670 w/ XSPC Blocks (SLI) |
|
|
Re: XSPC Rasa 750 RX240
Not sure if the recon fan controller can do that, But if you want to test it out and give it a shot let us know. But from my experience I don't think the fan controllers will do that, But I can be wrong, I've never use the recon controller before so maybe it will.
Most of the fan controllers I use are the manual dial style controllers.
| CPU: Intel i7 2600K |
| M/B: ASUS P8Z68 Deluxe |
| RAM: G.Skill Ripjaws DDR3-1600 PC3-12800 |
| GPU: MSI N460GTX Hawk |
|
|
Re: XSPC Rasa 750 RX240
I have it hooked up and here is a picture. I adjusted the dial on the back of the pump and set it to 3900, wanted 4000 but it is touchy. I have it on position 1.
| CPU: Intel Core i7 3820 |
| M/B: Asus Sabertooth X79 |
| RAM: 32GB Corsair Vengeance (8x4GB Sticks) |
| GPU: Gigabyte GTX670 w/ XSPC Blocks (SLI) |
|
|
Re: XSPC Rasa 750 RX240
Awesome Bob!! Looks like its just what you wanted.. Build looks awesome BTW
| CPU: Intel i7 2600K |
| M/B: ASUS P8Z68 Deluxe |
| RAM: G.Skill Ripjaws DDR3-1600 PC3-12800 |
| GPU: MSI N460GTX Hawk |
|
|
Re: XSPC Rasa 750 RX240
I may have to rethink this. With nothing connected to the cpu fan header I get a cpu fan error when I reboot. I have disabled the "Wait for F1" (or something like that) for now so it will boot.
| CPU: i7 980X |
| M/B: asus rampage black edition III |
| RAM: CORSAIR DOMINATOR PLATINUM 16GB 2133 |
| GPU: asus580 directcuIII 1536 MB GDDR5 / 782HZ OVERCLOCK |
|
|
Re: XSPC Rasa 750 RX240
Very nice Bob.
| CPU: Intel Core i7 3820 |
| M/B: Asus Sabertooth X79 |
| RAM: 32GB Corsair Vengeance (8x4GB Sticks) |
| GPU: Gigabyte GTX670 w/ XSPC Blocks (SLI) |
|
|
Re: XSPC Rasa 750 RX240
You can disable that in the bio so it doesn't look for a fan...
Thats what I did on my Asus Sabertooth x79 board. I don't have ANY fans plugged into any of the MB fan headers. I am using fan controller to control ALL my fans.
| CPU: Intel i7 2600K |
| M/B: ASUS P8Z68 Deluxe |
| RAM: G.Skill Ripjaws DDR3-1600 PC3-12800 |
| GPU: MSI N460GTX Hawk |
|
|
Re: XSPC Rasa 750 RX240
I did disable it in the BIOS but it still gave me a CPU fan error. I'll have to look again, maybe there is another spot also. I also have nothing plugged into any of the fan headers because of the Recon.
Where would be the best place to put the temp probe for the CPU? On the side of the waterblock?
| CPU: i7 930 Lapped 4.51@1.42 HT ON |
| M/B: Asus P6X58D-E |
| RAM: Corsair Dominator 6gig 3x2 1600@1723 |
| GPU: Sapphire 7970 OC Edition 1275/1700/1.200V |
|
|
Re: XSPC Rasa 750 RX240
On these Bios's the F1 is going to come up on screen but by disabling in the Bios just don't have to take any action
Only thing on my MB is the blue fan pump lead and is read thru windows or addition app software.
Later
| CPU: Intel i7 2600K |
| M/B: ASUS P8Z68 Deluxe |
| RAM: G.Skill Ripjaws DDR3-1600 PC3-12800 |
| GPU: MSI N460GTX Hawk |
|
|
Re: XSPC Rasa 750 RX240
Anybody know which brand of clear tubing stays clear?? The tubing that came with my kit has taken on a "Milky Color" while the water is crystal clear.
| CPU: AMD FX-8350 @ 4.6Ghz |
| M/B: Asus Crosshair V Formula |
| RAM: 16GB Corsair Dominator GT 1866MHz (9-10-9-27) |
| GPU: XFX HD 7970 Black Edition 3GB and Diamond HD 7970 3GB both @ 1125/1575MHz |
|
|
Re: XSPC Rasa 750 RX240
I would go with colored tubing. Check with Tony and Kenny as to what brand they've had the best experience with.
2nd Rig: AMD FX-8120; AMD Liquid Cooler by Asetek; Gigabyte 990FXA-UD3; 16GB G.Skill Ripjaws X Series 1600MHz; 2 x PowerColor HD 7870 Myst. Ed. (Tahiti LE); CM Storm Enforcer; SeaSonic X Series 850W3rd Rig: AMD A-3650; Asetek 550LC; Asus F1A75-M Pro; 8GB Kingston HyperX; XFX HD 6670 1GB GDDR5; Antec 300; Thermaltake TR2 650W
| CPU: Intel i7 2600K |
| M/B: ASUS P8Z68 Deluxe |
| RAM: G.Skill Ripjaws DDR3-1600 PC3-12800 |
| GPU: MSI N460GTX Hawk |
|
|
Re: XSPC Rasa 750 RX240
Thanks Sam, I wonder if you can still see any air bubbles in the blue tubing.
Posting Permissions
Reply With Quote
