LinkBack URL
About LinkBacksOk.So do you need to use a push -pull config on you're rad?
And what are the benefits of doing so. I have a Koolance Quad 120mm. Rad I am going to use in my AZZA rig.
Thank's for input.
|
|
| CPU: i7 980X |
| M/B: asus rampage black edition III |
| RAM: CORSAIR DOMINATOR PLATINUM 16GB 2133 |
| GPU: asus580 directcuIII 1536 MB GDDR5 / 782HZ OVERCLOCK |
|
|
Push - pull
Ok.So do you need to use a push -pull config on you're rad?
And what are the benefits of doing so. I have a Koolance Quad 120mm. Rad I am going to use in my AZZA rig.
Thank's for input.
| CPU: Core I7 3960X@5.2GHz |
| M/B: Asus Rampage IV Extreme |
| RAM: Corsair Dominator Platinum DDR3 2133@2400@CL11-9-11-30 8x4GB |
| GPU: 3x Asus GTX 680 4GB DCU II in Tri SLI/1x Asus 660 Ti physx |
|
|
Re: Push - pull
How thick is your radiator?If its 80mm thick like mine,push-pull with strong static pressure fans are most beneficial for better cooling
- i7 3770K@5GHz@1.345v/Alphacool monsta 360 with 6x GT Ap-15/2x XFX 7970 3GB DD@1550/1600 16x/16x Crossfire/Gigabyte Z77X UP7/G-Skill Ripjaws Z Red DDR3-1866@2133@10-11-11-30,4X4GB/OCZ Vertex 4 256gb ssd/NZXT Switch 810 White/Asus Xonar D2X/3x AOC I2757FH/Seasonic X 1050W/Bitfenix sleeve cable kit red/2x 40cm RC RGB Led
| CPU: i7 980X |
| M/B: asus rampage black edition III |
| RAM: CORSAIR DOMINATOR PLATINUM 16GB 2133 |
| GPU: asus580 directcuIII 1536 MB GDDR5 / 782HZ OVERCLOCK |
|
|
Re: Push - pull
Yes it is 80mm.
| CPU: Core i7 3930K |
| M/B: ASRock X79 Extreme9 |
| RAM: 64GBs Kingston Beast 2133MHz |
| GPU: Two EVGA GTX 690s |
|
|
Re: Push - pull
Jim, who makes the Rad you have, and can you post a photo?
2nd system
ASRock Z77 OC Formula, 2700K, Two EVGA GTX680s, and one GTX660 Ti PE, 16GBs 2133MHz, Lian Li A75X , Maxrevo 1500W, TT Extreme 240
3rd system
ASUS ROG X79 Rampage 4 Formula, 3930K, Boreas Chiller, VisionTek 480GB, WD 750GB, 16GBs Kingston HyperX Red 1600MHz, Two GTX680s, OCZ 1250W, CM Stryker modded for the Boreas Chiller, 3 white Skull fans grills from MNPCTech.
.
| CPU: i7 920, 4.2Ghz HT |
| M/B: P6X58D Premium |
| RAM: OCZ Flex EX PC3-17000 12GB |
| GPU: Asus EAH5870 |
|
|
Re: Push - pull
Stan, he said koolance.
It's must be old model because koolance stops making thick rads now. A rad that thick is definitely benefit with high rpm and push/pull configuration. The draw back is the fan noises. I assume this rad has 20 fins per inch right? The more fins the higher fan speed needed, the more fins the more noise is generated.
| CPU: i7 980X |
| M/B: asus rampage black edition III |
| RAM: CORSAIR DOMINATOR PLATINUM 16GB 2133 |
| GPU: asus580 directcuIII 1536 MB GDDR5 / 782HZ OVERCLOCK |
|
|
Re: Push - pull
It is a Koolance 80mm x 400mm.
| CPU: Intel Core i5 2500K Sandy Bridge |
| M/B: ASUS Maximus IV Gene-Z/Gen3 Mother Board |
| RAM: 16 GB Crucial Ballistix Elite |
| GPU: VisionTek Radeon HD 6950 |
|
|
Re: Push - pull
Run it in a push pull with fan controller so when the extra air flow is not needed you can crank down the speed. and its nice and quiet
| CPU: i7 980X |
| M/B: asus rampage black edition III |
| RAM: CORSAIR DOMINATOR PLATINUM 16GB 2133 |
| GPU: asus580 directcuIII 1536 MB GDDR5 / 782HZ OVERCLOCK |
|
|
Re: Push - pull
I have a good fan controler also. Thank you Vinman.
| CPU: Intel Core i7 3820 |
| M/B: Asus Sabertooth X79 |
| RAM: 32GB Corsair Vengeance (8x4GB Sticks) |
| GPU: Gigabyte GTX670 w/ XSPC Blocks (SLI) |
|
|
Re: Push - pull
Hey Jim, That one doesn't look like a 80mm thick one.. maybe 25-30mm thick..
But push pull will help, but as tony mentioned. More fans more noise.. fan controller will come in handy for controlling the fans in low speeds when its not needed.
| CPU: i7 920, 4.2Ghz HT |
| M/B: P6X58D Premium |
| RAM: OCZ Flex EX PC3-17000 12GB |
| GPU: Asus EAH5870 |
|
|
Re: Push - pull
that doesn't look like thick profile rad, yes fan controller help with the fan noise.
tbh, the value performance with push/pull configure for slim rad is not worth it. The four extra fans will set you back about $40 bucks, at least and the performance gain is very minimal.
| CPU: i7 980X |
| M/B: asus rampage black edition III |
| RAM: CORSAIR DOMINATOR PLATINUM 16GB 2133 |
| GPU: asus580 directcuIII 1536 MB GDDR5 / 782HZ OVERCLOCK |
|
|
Re: Push - pull
Thank's.That is what I am trying to find out.I am trying to cut down on the fan noise.
And the RAD is only 1 1/4'' thick.I dont know what mm that is.
Last edited by killjoyjim; 15-12-2012 at 18:46.
| CPU: Core i7 3930K |
| M/B: ASRock X79 Extreme9 |
| RAM: 64GBs Kingston Beast 2133MHz |
| GPU: Two EVGA GTX 690s |
|
|
Re: Push - pull
Hey Guys, this is Jims first water cooling setup, which is why I asked for the photos I kind of figured it wasn't 80mm, not many people giveaway 80mm/ 480 Rads
2nd system
ASRock Z77 OC Formula, 2700K, Two EVGA GTX680s, and one GTX660 Ti PE, 16GBs 2133MHz, Lian Li A75X , Maxrevo 1500W, TT Extreme 240
3rd system
ASUS ROG X79 Rampage 4 Formula, 3930K, Boreas Chiller, VisionTek 480GB, WD 750GB, 16GBs Kingston HyperX Red 1600MHz, Two GTX680s, OCZ 1250W, CM Stryker modded for the Boreas Chiller, 3 white Skull fans grills from MNPCTech.
.
| CPU: i7 980X |
| M/B: asus rampage black edition III |
| RAM: CORSAIR DOMINATOR PLATINUM 16GB 2133 |
| GPU: asus580 directcuIII 1536 MB GDDR5 / 782HZ OVERCLOCK |
|
|
Re: Push - pull
Sorry.I am trying to learn as I GO.
| CPU: Intel Core i5 2500K Sandy Bridge |
| M/B: ASUS Maximus IV Gene-Z/Gen3 Mother Board |
| RAM: 16 GB Crucial Ballistix Elite |
| GPU: VisionTek Radeon HD 6950 |
|
|
Re: Push - pull
Jim Its a 30mm rad
| CPU: Core i7 3930K |
| M/B: ASRock X79 Extreme9 |
| RAM: 64GBs Kingston Beast 2133MHz |
| GPU: Two EVGA GTX 690s |
|
|
Re: Push - pull
Jim, there's nothing to be sorry about, it's your first WC buildOriginally Posted by killjoyjim
Sorry.
2nd system
ASRock Z77 OC Formula, 2700K, Two EVGA GTX680s, and one GTX660 Ti PE, 16GBs 2133MHz, Lian Li A75X , Maxrevo 1500W, TT Extreme 240
3rd system
ASUS ROG X79 Rampage 4 Formula, 3930K, Boreas Chiller, VisionTek 480GB, WD 750GB, 16GBs Kingston HyperX Red 1600MHz, Two GTX680s, OCZ 1250W, CM Stryker modded for the Boreas Chiller, 3 white Skull fans grills from MNPCTech.
.
| CPU: i7 980X |
| M/B: asus rampage black edition III |
| RAM: CORSAIR DOMINATOR PLATINUM 16GB 2133 |
| GPU: asus580 directcuIII 1536 MB GDDR5 / 782HZ OVERCLOCK |
|
|
Re: Push - pull
Thank's Stan. And Vinman. So my rad is a 30mm x 400mm.
Posting Permissions
Reply With Quote
