motherboards
Arctic
Arctic Feezer 7x
Page 1 of 3 1 2 3 LastLast
Results 1 to 16 of 37

Thread: How to settle a best loop?

  1. #1
    Moderator

    Status
    Smiki007 is offline

    Last Online
    09-07-2020 @ 13:21
    Join Date
    Apr 2011
    Location
    Lima, Peru
    Posts
    2,442
    CPU: ThreadRipper 2950X @4.1Ghz
    M/B: MSI Meg X399 Creation
    RAM: 64GB G.Skill Trident Z RGB 3000
    GPU: 2x Aorus GTX 1080Ti Waterforce WB Xtreme
    • Smiki007's Full Spec's
      • Case:
      • Thermaltake Core X9
      • PSU:
      • EVGA Supernova 1600W 80+ G2
      • Cooling:
      • 2x Enermax NEOChanger Res/Pump Combo + 2x Swiftech Xtreme FLow 360mm Rads + ACool Nexxos XT45 240mm Rad + EKWB Pom / Nickel Full Cover TR4 Water Block)
      • Monitor:
      • ASUS VG278H 3D
      • OS:
      • W10 Pro v.1809
    Thanks
    247
    Thanked 299 Times in 267 Posts
    Points: 108,027, Level: 100
    Points: 108,027, Level: 100
    Level completed: 0%,
    Points required for next Level: 0
    Level completed: 0%, Points required for next Level: 0
    Overall activity: 76.0%
    Overall activity: 76.0%

    Default How to settle a best loop?

    Hi to you all.
    In the last couple of days i was bumping my head against the wall trying to solve this enigma.
    Lines below is the list of LC parts that I have:
    1. Swiftech H2O-220 Edge HD Dual 120mm Liquid Cooling Kit - Black, (240mm rad w/itegrated MCP x35 Pump and CPU Water Block), bought previously for my old build
    2. Phobya G-Changer 360mm Radiator
    3. Swiftech MCRES Micro Revision 2 reservoir
    4. Swiftech MCP 655 B Pump
    5. 2x EK-FC GTX Titan/780 - Acetal water blocks
    Now my concern is how to assemble all together in one good and effective loop (to cool my CPU and two 780s). Concerning myself as a total ignorant i arranged my loop shown in schematic pic below:
    .
    Also i'm planning to use a pure distilled water combined with silver kill-coil and Petra's Tech Nuke PHN Concentrated Biocide (is that ok?)




    Always look beyond the limits...

  2. #2
    Regular Member

    Status
    PoLoMoTo is offline

    Last Online
    01-02-2020 @ 10:51
    Join Date
    Nov 2011
    Location
    US
    Posts
    3,230
    CPU: i7-5960x, 8 cores, 16 threads @ 3.5GHz
    M/B: Asus X99 Deluxe
    RAM: 16GB (4 x 4GB), G.Skill Ripsaws II, DDR4-2666
    GPU: Gigabyte Aorus 2080 Ti Waterblock
    • PoLoMoTo's Full Spec's
      • Case:
      • Coolermaster Cosmos C700m
      • PSU:
      • Corsair H1000i 1000 watt
      • Cooling:
      • 3x120mm rad, 1x120mm rad, 4x Noctua Industrial NFF-12 3000RPM, XSPC Raystorm CPU Block, CALC Photon 270mm D5 res/pump combo
      • Sound:
      • Schiit Modi, Samson SM10, Schiit Valhalla 2
      • Monitor:
      • LG 38WK95C-W 38" 21:9 3840x1600
      • OS:
      • Windows 10 and Arch Linux
      • Misc:
      • OLKB Planck 40% keyboard with Godspeed keycaps and Logitech G930 mouse with PowerPlay wireless charging mousepad
    Thanks
    73
    Thanked 119 Times in 109 Posts
    Points: 21,659, Level: 45
    Points: 21,659, Level: 45
    Level completed: 1%,
    Points required for next Level: 891
    Level completed: 1%, Points required for next Level: 891
    Overall activity: 99.6%
    Overall activity: 99.6%

    Default Re: How to settle a best loop?

    Honestly it doesn't make much of a difference, as long as the res feeds the pump. But if you want to get technical you should probably put the second rad after the CPU, before the GPUs.

  3. #3
    Moderator

    Status
    Smiki007 is offline

    Last Online
    09-07-2020 @ 13:21
    Join Date
    Apr 2011
    Location
    Lima, Peru
    Posts
    2,442
    CPU: ThreadRipper 2950X @4.1Ghz
    M/B: MSI Meg X399 Creation
    RAM: 64GB G.Skill Trident Z RGB 3000
    GPU: 2x Aorus GTX 1080Ti Waterforce WB Xtreme
    • Smiki007's Full Spec's
      • Case:
      • Thermaltake Core X9
      • PSU:
      • EVGA Supernova 1600W 80+ G2
      • Cooling:
      • 2x Enermax NEOChanger Res/Pump Combo + 2x Swiftech Xtreme FLow 360mm Rads + ACool Nexxos XT45 240mm Rad + EKWB Pom / Nickel Full Cover TR4 Water Block)
      • Monitor:
      • ASUS VG278H 3D
      • OS:
      • W10 Pro v.1809
    Thanks
    247
    Thanked 299 Times in 267 Posts
    Points: 108,027, Level: 100
    Points: 108,027, Level: 100
    Level completed: 0%,
    Points required for next Level: 0
    Level completed: 0%, Points required for next Level: 0
    Overall activity: 76.0%
    Overall activity: 76.0%

    Default Re: How to settle a best loop?

    But the two pumps (MCP x35 and MCP 655b) , being so close to each other, doesn't going to choke the flow?

    Always look beyond the limits...

  4. #4
    Regular Member

    Status
    velko is offline

    Last Online
    20-12-2013 @ 02:09
    Join Date
    Jun 2013
    Location
    Slovenia
    Posts
    114
    CPU: AMD FX8150
    M/B: Asus Crosshair V formula-z
    RAM: Corsair Dominator GT 8Gb 1866Mhz
    GPU: Sapphire HD7970 reference
    • velko's Full Spec's
      • Case:
      • Corsair Obsidian 900D
      • PSU:
      • Corsair TX750 V2
      • Cooling:
      • EKWB EK-KIT H30 240 LTX,EK-FC7970(EN)Nickel Plexi gpu block,EK-Supreme LTX AMD - Nickel CSQ cpu block,EK-FB ASUS C5F-Z - Acetal+Nickel mobo block,EK-D5 X RES,EK Cool Stream PE 480 rad.
      • Sound:
      • on board
      • Monitor:
      • LG W2443T
      • OS:
      • WIN 7 ultimate 64 bit.
      • Misc:
      • Roccat Isku,Roccat Savu.
    Thanks
    11
    Thanked 7 Times in 6 Posts
    Points: 702, Level: 6
    Points: 702, Level: 6
    Level completed: 76%,
    Points required for next Level: 48
    Level completed: 76%, Points required for next Level: 48
    Overall activity: 13.0%
    Overall activity: 13.0%

    Default Re: How to settle a best loop?

    Dont know what will work best for you but i have setup in this order EK pump/res. combo-240mm rad-mobo,cpu-120mm rad with push/pull-gpu-240mm rad and back to pump/res.

  5. #5
    OC Jedi Master

    Status
    Deton is offline

    Last Online
    27-02-2014 @ 22:13
    Join Date
    Dec 2006
    Location
    Canada
    Posts
    8,493
    CPU: i7 920, 4.2Ghz HT
    M/B: P6X58D Premium
    RAM: OCZ Flex EX PC3-17000 12GB
    GPU: Asus EAH5870
    • Deton's Full Spec's
      • Case:
      • Lian Li A70F
      • PSU:
      • Enermax Galaxy Evo 1250W
      • Cooling:
      • Custom H20 setup.
      • Sound:
      • Onboard
      • Monitor:
      • ViewSonic VX2435
      • OS:
      • Win 7 - 64bit
    Thanks
    45
    Thanked 1,179 Times in 1,026 Posts
    Points: 50,246, Level: 69
    Points: 50,246, Level: 69
    Level completed: 36%,
    Points required for next Level: 904
    Level completed: 36%, Points required for next Level: 904
    Overall activity: 7.0%
    Overall activity: 7.0%

    Default Re: How to settle a best loop?

    No need to use MCP 655B, the X35 pump is powerful enough for your setup, also you don't really need the second Micro res unless you like to have it.

    The second option is do two separate loops. I would use the dual rad to cool the 780s and the triple rad for the 3960x. If you are wondering why only use dual rad for two GPUs, because they can run better at high temps and the CPU, also its temp will cut in half as soon it goes under water.

  6. The following user thanks Deton For this above post:

    Smiki007 (02-07-2013)

  7. #6
    OC Jedi Master

    Status
    Deton is offline

    Last Online
    27-02-2014 @ 22:13
    Join Date
    Dec 2006
    Location
    Canada
    Posts
    8,493
    CPU: i7 920, 4.2Ghz HT
    M/B: P6X58D Premium
    RAM: OCZ Flex EX PC3-17000 12GB
    GPU: Asus EAH5870
    • Deton's Full Spec's
      • Case:
      • Lian Li A70F
      • PSU:
      • Enermax Galaxy Evo 1250W
      • Cooling:
      • Custom H20 setup.
      • Sound:
      • Onboard
      • Monitor:
      • ViewSonic VX2435
      • OS:
      • Win 7 - 64bit
    Thanks
    45
    Thanked 1,179 Times in 1,026 Posts
    Points: 50,246, Level: 69
    Points: 50,246, Level: 69
    Level completed: 36%,
    Points required for next Level: 904
    Level completed: 36%, Points required for next Level: 904
    Overall activity: 7.0%
    Overall activity: 7.0%

    Default Re: How to settle a best loop?

    Quote Originally Posted by Smiki007 View Post
    But the two pumps (MCP x35 and MCP 655b) , being so close to each other, doesn't going to choke the flow?
    It's best to use two identical pumps in series because the slower pump hinder the faster pump's flow.

  8. #7
    Regular Member

    Status
    PoLoMoTo is offline

    Last Online
    01-02-2020 @ 10:51
    Join Date
    Nov 2011
    Location
    US
    Posts
    3,230
    CPU: i7-5960x, 8 cores, 16 threads @ 3.5GHz
    M/B: Asus X99 Deluxe
    RAM: 16GB (4 x 4GB), G.Skill Ripsaws II, DDR4-2666
    GPU: Gigabyte Aorus 2080 Ti Waterblock
    • PoLoMoTo's Full Spec's
      • Case:
      • Coolermaster Cosmos C700m
      • PSU:
      • Corsair H1000i 1000 watt
      • Cooling:
      • 3x120mm rad, 1x120mm rad, 4x Noctua Industrial NFF-12 3000RPM, XSPC Raystorm CPU Block, CALC Photon 270mm D5 res/pump combo
      • Sound:
      • Schiit Modi, Samson SM10, Schiit Valhalla 2
      • Monitor:
      • LG 38WK95C-W 38" 21:9 3840x1600
      • OS:
      • Windows 10 and Arch Linux
      • Misc:
      • OLKB Planck 40% keyboard with Godspeed keycaps and Logitech G930 mouse with PowerPlay wireless charging mousepad
    Thanks
    73
    Thanked 119 Times in 109 Posts
    Points: 21,659, Level: 45
    Points: 21,659, Level: 45
    Level completed: 1%,
    Points required for next Level: 891
    Level completed: 1%, Points required for next Level: 891
    Overall activity: 99.6%
    Overall activity: 99.6%

    Default Re: How to settle a best loop?

    Quote Originally Posted by Smiki007 View Post
    But the two pumps (MCP x35 and MCP 655b) , being so close to each other, doesn't going to choke the flow?
    I would suggest ditching the different pumps but the pumps are closer to each other in your diagram anyway.

  9. #8
    Regular Member

    Status
    PoLoMoTo is offline

    Last Online
    01-02-2020 @ 10:51
    Join Date
    Nov 2011
    Location
    US
    Posts
    3,230
    CPU: i7-5960x, 8 cores, 16 threads @ 3.5GHz
    M/B: Asus X99 Deluxe
    RAM: 16GB (4 x 4GB), G.Skill Ripsaws II, DDR4-2666
    GPU: Gigabyte Aorus 2080 Ti Waterblock
    • PoLoMoTo's Full Spec's
      • Case:
      • Coolermaster Cosmos C700m
      • PSU:
      • Corsair H1000i 1000 watt
      • Cooling:
      • 3x120mm rad, 1x120mm rad, 4x Noctua Industrial NFF-12 3000RPM, XSPC Raystorm CPU Block, CALC Photon 270mm D5 res/pump combo
      • Sound:
      • Schiit Modi, Samson SM10, Schiit Valhalla 2
      • Monitor:
      • LG 38WK95C-W 38" 21:9 3840x1600
      • OS:
      • Windows 10 and Arch Linux
      • Misc:
      • OLKB Planck 40% keyboard with Godspeed keycaps and Logitech G930 mouse with PowerPlay wireless charging mousepad
    Thanks
    73
    Thanked 119 Times in 109 Posts
    Points: 21,659, Level: 45
    Points: 21,659, Level: 45
    Level completed: 1%,
    Points required for next Level: 891
    Level completed: 1%, Points required for next Level: 891
    Overall activity: 99.6%
    Overall activity: 99.6%

    Default Re: How to settle a best loop?

    Quote Originally Posted by Deton View Post
    The second option is do two separate loops. I would use the dual rad to cool the 780s and the triple rad for the 3960x. If you are wondering why only use dual rad for two GPUs, because they can run better at high temps and the CPU, also its temp will cut in half as soon it goes under water.
    Thats probably the best solution if you have to use those two pumps

  10. #9
    Moderator

    Status
    Smiki007 is offline

    Last Online
    09-07-2020 @ 13:21
    Join Date
    Apr 2011
    Location
    Lima, Peru
    Posts
    2,442
    CPU: ThreadRipper 2950X @4.1Ghz
    M/B: MSI Meg X399 Creation
    RAM: 64GB G.Skill Trident Z RGB 3000
    GPU: 2x Aorus GTX 1080Ti Waterforce WB Xtreme
    • Smiki007's Full Spec's
      • Case:
      • Thermaltake Core X9
      • PSU:
      • EVGA Supernova 1600W 80+ G2
      • Cooling:
      • 2x Enermax NEOChanger Res/Pump Combo + 2x Swiftech Xtreme FLow 360mm Rads + ACool Nexxos XT45 240mm Rad + EKWB Pom / Nickel Full Cover TR4 Water Block)
      • Monitor:
      • ASUS VG278H 3D
      • OS:
      • W10 Pro v.1809
    Thanks
    247
    Thanked 299 Times in 267 Posts
    Points: 108,027, Level: 100
    Points: 108,027, Level: 100
    Level completed: 0%,
    Points required for next Level: 0
    Level completed: 0%, Points required for next Level: 0
    Overall activity: 76.0%
    Overall activity: 76.0%

    Default Re: How to settle a best loop?

    Doing two separate loops (i also thought about), will be better for me i think because i already bought all parts. In that case the loop will look like
    First Loop: Res (Micro res.) ---> MCP 655b Pump ---> 360 Rad ---> CPU ---> Res
    Second Loop: Swiftech H2O-220 Edge (Rad w/Integrated MCP 35X Pump) ---> GPU ---> GPU ---> Swiftech H2O-220 Edge
    right?
    Thanks Deton.
    Last edited by Smiki007; 02-07-2013 at 13:42.

    Always look beyond the limits...

  11. #10
    Banned

    Status
    Earthmonger is offline

    Last Online
    19-07-2013 @ 23:39
    Join Date
    Apr 2010
    Posts
    1,344
    Thanks
    81
    Thanked 153 Times in 122 Posts
    Points: 6,620, Level: 24
    Points: 6,620, Level: 24
    Level completed: 14%,
    Points required for next Level: 430
    Level completed: 14%, Points required for next Level: 430
    Overall activity: 0%
    Overall activity: 0%

    Default Re: How to settle a best loop?

    If you're using kill coils, you don't need biocide. They both do the same job.

  12. The following user thanks Earthmonger For this above post:

    Smiki007 (02-07-2013)

  13. #11
    Moderator

    Status
    Smiki007 is offline

    Last Online
    09-07-2020 @ 13:21
    Join Date
    Apr 2011
    Location
    Lima, Peru
    Posts
    2,442
    CPU: ThreadRipper 2950X @4.1Ghz
    M/B: MSI Meg X399 Creation
    RAM: 64GB G.Skill Trident Z RGB 3000
    GPU: 2x Aorus GTX 1080Ti Waterforce WB Xtreme
    • Smiki007's Full Spec's
      • Case:
      • Thermaltake Core X9
      • PSU:
      • EVGA Supernova 1600W 80+ G2
      • Cooling:
      • 2x Enermax NEOChanger Res/Pump Combo + 2x Swiftech Xtreme FLow 360mm Rads + ACool Nexxos XT45 240mm Rad + EKWB Pom / Nickel Full Cover TR4 Water Block)
      • Monitor:
      • ASUS VG278H 3D
      • OS:
      • W10 Pro v.1809
    Thanks
    247
    Thanked 299 Times in 267 Posts
    Points: 108,027, Level: 100
    Points: 108,027, Level: 100
    Level completed: 0%,
    Points required for next Level: 0
    Level completed: 0%, Points required for next Level: 0
    Overall activity: 76.0%
    Overall activity: 76.0%

    Default Re: How to settle a best loop?

    Ahh, ok, what i can use against corrosion?

    Always look beyond the limits...

  14. #12
    Moderator

    Status
    Smiki007 is offline

    Last Online
    09-07-2020 @ 13:21
    Join Date
    Apr 2011
    Location
    Lima, Peru
    Posts
    2,442
    CPU: ThreadRipper 2950X @4.1Ghz
    M/B: MSI Meg X399 Creation
    RAM: 64GB G.Skill Trident Z RGB 3000
    GPU: 2x Aorus GTX 1080Ti Waterforce WB Xtreme
    • Smiki007's Full Spec's
      • Case:
      • Thermaltake Core X9
      • PSU:
      • EVGA Supernova 1600W 80+ G2
      • Cooling:
      • 2x Enermax NEOChanger Res/Pump Combo + 2x Swiftech Xtreme FLow 360mm Rads + ACool Nexxos XT45 240mm Rad + EKWB Pom / Nickel Full Cover TR4 Water Block)
      • Monitor:
      • ASUS VG278H 3D
      • OS:
      • W10 Pro v.1809
    Thanks
    247
    Thanked 299 Times in 267 Posts
    Points: 108,027, Level: 100
    Points: 108,027, Level: 100
    Level completed: 0%,
    Points required for next Level: 0
    Level completed: 0%, Points required for next Level: 0
    Overall activity: 76.0%
    Overall activity: 76.0%

    Default Re: How to settle a best loop?

    Quote Originally Posted by Deton View Post
    The second option is do two separate loops. I would use the dual rad to cool the 780s and the triple rad for the 3960x. If you are wondering why only use dual rad for two GPUs, because they can run better at high temps and the CPU, also its temp will cut in half as soon it goes under water.
    Problem solved , there'll be two loops.
    Thanks Deton.

    Always look beyond the limits...

  15. #13
    Banned

    Status
    Earthmonger is offline

    Last Online
    19-07-2013 @ 23:39
    Join Date
    Apr 2010
    Posts
    1,344
    Thanks
    81
    Thanked 153 Times in 122 Posts
    Points: 6,620, Level: 24
    Points: 6,620, Level: 24
    Level completed: 14%,
    Points required for next Level: 430
    Level completed: 14%, Points required for next Level: 430
    Overall activity: 0%
    Overall activity: 0%

    Default Re: How to settle a best loop?

    Corrosion? Are you mixing metals other than copper, brass, and nickel? If not, unnecessary.

    If, on the slim chance, you're using aluminum in that loop somewhere, you need a corrosion inhibitor, not a biocide.

  16. The following user thanks Earthmonger For this above post:

    Smiki007 (02-07-2013)

  17. #14
    Moderator

    Status
    Smiki007 is offline

    Last Online
    09-07-2020 @ 13:21
    Join Date
    Apr 2011
    Location
    Lima, Peru
    Posts
    2,442
    CPU: ThreadRipper 2950X @4.1Ghz
    M/B: MSI Meg X399 Creation
    RAM: 64GB G.Skill Trident Z RGB 3000
    GPU: 2x Aorus GTX 1080Ti Waterforce WB Xtreme
    • Smiki007's Full Spec's
      • Case:
      • Thermaltake Core X9
      • PSU:
      • EVGA Supernova 1600W 80+ G2
      • Cooling:
      • 2x Enermax NEOChanger Res/Pump Combo + 2x Swiftech Xtreme FLow 360mm Rads + ACool Nexxos XT45 240mm Rad + EKWB Pom / Nickel Full Cover TR4 Water Block)
      • Monitor:
      • ASUS VG278H 3D
      • OS:
      • W10 Pro v.1809
    Thanks
    247
    Thanked 299 Times in 267 Posts
    Points: 108,027, Level: 100
    Points: 108,027, Level: 100
    Level completed: 0%,
    Points required for next Level: 0
    Level completed: 0%, Points required for next Level: 0
    Overall activity: 76.0%
    Overall activity: 76.0%

    Default Re: How to settle a best loop?

    Quote Originally Posted by Earthmonger View Post
    Corrosion? Are you mixing metals other than copper, brass, and nickel? If not, unnecessary.

    If, on the slim chance, you're using aluminum in that loop somewhere, you need a corrosion inhibitor, not a biocide.
    Just copper and brass, OK, in that case i'll gonna use only D. Water and kill coil.
    Thanks.

    Always look beyond the limits...

  18. #15
    Banned

    Status
    Doctor_Death is offline

    Last Online
    25-02-2016 @ 11:04
    Join Date
    Apr 2008
    Location
    Punxsutawney, Pa. - USA
    Posts
    11,789
    CPU: Core i7 3930K
    M/B: ASRock X79 Extreme9
    RAM: 64GBs Kingston Beast 2133MHz
    GPU: Two EVGA GTX 690s in Quad SLI
    • Doctor_Death's Full Spec's
      • Case:
      • Corsair 900D
      • PSU:
      • Corsair AX1200i
      • Cooling:
      • Complete system cooled by EK Water Blocks
      • Sound:
      • Creative Sound Core 3D Audio 7.1
      • Monitor:
      • Dell U3011 30" 2560 x 1600 Res
      • OS:
      • Win 7 Ultimate 64Bit
      • Misc:
      • Asus Blu-Ray, Asus 24X DVD Burner, Max Mechanicalkeyboard / Razer Abyssus Mouse / Razer eXact Mat with wrist rest.
    Thanks
    339
    Thanked 2,582 Times in 1,551 Posts
    Points: 490,204, Level: 100
    Points: 490,204, Level: 100
    Level completed: 0%,
    Points required for next Level: 0
    Level completed: 0%, Points required for next Level: 0
    Overall activity: 0%
    Overall activity: 0%

    Default Re: How to settle a best loop?

    Quote Originally Posted by PoLoMoTo View Post
    I would suggest ditching the different pumps but the pumps are closer to each other in your diagram anyway.
    Polo, Deton is Pure OC's water cooling expert, so please stay out of this lol

  19. #16
    Regular Member

    Status
    PoLoMoTo is offline

    Last Online
    01-02-2020 @ 10:51
    Join Date
    Nov 2011
    Location
    US
    Posts
    3,230
    CPU: i7-5960x, 8 cores, 16 threads @ 3.5GHz
    M/B: Asus X99 Deluxe
    RAM: 16GB (4 x 4GB), G.Skill Ripsaws II, DDR4-2666
    GPU: Gigabyte Aorus 2080 Ti Waterblock
    • PoLoMoTo's Full Spec's
      • Case:
      • Coolermaster Cosmos C700m
      • PSU:
      • Corsair H1000i 1000 watt
      • Cooling:
      • 3x120mm rad, 1x120mm rad, 4x Noctua Industrial NFF-12 3000RPM, XSPC Raystorm CPU Block, CALC Photon 270mm D5 res/pump combo
      • Sound:
      • Schiit Modi, Samson SM10, Schiit Valhalla 2
      • Monitor:
      • LG 38WK95C-W 38" 21:9 3840x1600
      • OS:
      • Windows 10 and Arch Linux
      • Misc:
      • OLKB Planck 40% keyboard with Godspeed keycaps and Logitech G930 mouse with PowerPlay wireless charging mousepad
    Thanks
    73
    Thanked 119 Times in 109 Posts
    Points: 21,659, Level: 45
    Points: 21,659, Level: 45
    Level completed: 1%,
    Points required for next Level: 891
    Level completed: 1%, Points required for next Level: 891
    Overall activity: 99.6%
    Overall activity: 99.6%

    Default Re: How to settle a best loop?

    Quote Originally Posted by Doctor_Death View Post
    Polo, Deton is Pure OC's water cooling expert, so please stay out of this lol
    I was writing that as deton posted the other ones...

Page 1 of 3 1 2 3 LastLast

Remove Ads

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. AMD Announces Never Settle Catalyst 12.11 Driver Update
    By xelosia in forum General Discussion
    Replies: 0
    Last Post: 22-10-2012, 11:56
  2. No Justice For The Upgrader? [settle down: this is humor, folks]
    By Havaneiss Dei in forum General Discussion
    Replies: 6
    Last Post: 16-03-2012, 22:27
  3. New loop for Haf X
    By semi-sentient in forum Cooling
    Replies: 8
    Last Post: 05-07-2011, 04:07
  4. Nvidia settle GPU price fixing class action case
    By News Team in forum Hardware News
    Replies: 0
    Last Post: 27-09-2008, 09:45
  5. One Loop, 2, 3?
    By grumpydaddy in forum Cooling
    Replies: 9
    Last Post: 23-09-2008, 16:17

Search tags for this page

rad, res and pump installed

,

swiftech mcres micro revision 2 reservoir h20 220 edge

,

water cooling loop plans

Click on a term to search for related topics.

Tags for this Thread