Overclock 3820 with Noctua NH-D14

[AirAddict]

Hello guys
I starded my overclock adventure changing BIOS settings
CPU LLC set to High
CPU Current Capability set 130%
VCCSA Current Cpability set 130%
CPU Spread Spectrum disabled
PCI Spread Spectrum disabled
CPU VCore voltage set to Manual
CPU VCCSA voltage set to 1.000v
Enhanced Intel SpeedStepT disabled as all CPU reports and C1E
Memory set by default 9-9-9-28
Multi first set to 36 to change the CPU Strap to 125, setting than multi to 37


with 1.200 volts. Nothing appened.
I used 1.225v ... bluescreen after 20min Torture prime95 test.
The same after 2h with 1.250v... and success with 1.275v Torte test prime 95 for 12h.

Ambient temperature: 20 degrees

</p><p>Uploaded with ImageShack.us</p>

Temps:
Core 0: 65 max - 67 - idle - 32
Core 1: 61 max - 63 - idle - 31
Core 2: 61 max - 63 - idle - 33
Core 3: 64 max - 65 - idle - 32

12h prime95 Blend Torture Test final

Uploaded with ImageShack.us

Would you make any changes??
I would like to know what this comunity think
Thanks guys!

[killjoyjim]

WELCOME TO PURE

[AirAddict]

Many thanks but you have experience witx X79?

[Drdeath]

I run a 3930K and do all the reviews. Your good up to 75 under load so you have a ways to go(higher). You should easily get 4,2GHz with the Noctua D-14

[AirAddict]

Please, look at my post.
Im OCng 4625MHz 125x37 1.275v
9-9-9-28 1666MHz Memory
Anyone can advice me please if im wrong?
Thanks

[Drdeath]

voltage seems low for the clock but you may just have a good chip. Does it pass 3 hrs prime95?

[AirAddict]

voltage seems low for the clock but you may just have a good chip. Does it pass 3 hrs prime95?

12h prime95 blend torture test

[Deton]

Does it pass 3 hrs prime95?

You need some sleep.