When my system is on overclocked settings 4.2ghz HT enabled it has passed 20 times of LinX no worries, as soon as the game application is launched and the game begins, Boom! the display goes off into standby mode! need to do a reboot
But when my system is on factory settings, no issues at all it games fine etc...i totally have no darn clue why
Quite sure it aint the driver and Video Card issues, as i've tried catalyst 9.3 all the way to 9.6 all the same OC mode ... screen goes blank
non overclock perfect non problems... the system works well games fine etc...once it is overclocked the screen goes blank as soon as the game begins! this is really frustrating worst part is even on overclocked settings GPU benchmark programs works perfectly fine: FurMark, OCCT GPU test, Vantage and 3DMark all works in overclocked mode! As soon as a Game begins thats it ...blank screen!
here are my BIOS settings and if any1 can help i will be grateful. Thanks
Mother Board ( EVGA X58 Classified E-760 )
Bios ( S615 ) 8/25/2009
CPU ( 920 ) (DO)
CPU Cooler ( Heat Killer 3.0 )
Memory ( Team Xtreem 1866mhz 9-9-9-24)
PSU ( Corsair HX1000 )
GPU ( 4870x2 ~ EK full cover )
Drivers ( catalyst 9.8 )
Operating System ( vista x64 )
Frequency Control
CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 200 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( 3205 )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )
Memory Feature
Memory Speed ( XMP Profile 1 )
Memory Control Setting ( Enabled )
Memory Frequency ( 1066Mhz / 2:14 ) = target frequency 1600mhz below rated 1866
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 9 )
tRCD Setting ( 9 )
tRP Setting ( 9 )
tRAS Setting ( 24 )
tRFC Setting ( Auto )
Command Rate ( Auto )
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.3 )
CPU VTT Voltage ( +100 )
CPU PLL VCore ( 1.80 )
**IOH PLL VCore ( 1.80 ) QPI PLL VCore ( 1.25 )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( +0mV )
IOH VCore ( 1.10 )
IOH/ICH I/O Voltage ( 1.50 )
**VTT PWM Frequency ( 250 KHZ )
**CPU PWM Frequency ( 800 KHZ )
**CPU Impedance ( Auto )
**QPI Signal Compensation (Auto )
ICH VCore ( Auto )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit (Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.80 GT/s )
OC Recorvery ( Enabled )






LinkBack URL
About LinkBacks
Reply With Quote


