   |
| CPU: i7-980, 6 cores, 12 threads, 4.5 GHz |
| M/B: Asus P6X58-E Pro |
| RAM: 24GB (6 x 4GB), G.Skill Ripsaw, DDR3-1600, 1730 MHz |
| GPU: 2x Sapphire Radeon HD 6950, 2GB, 880/1375 & 800/1250, Unlocked shaders on one |
|
|
Anyone good with ICs?
I've discovered that the speakers I want to use on my computer wont put out enough sound without an amp so I'm gonna build a small amp inside each speaker that run off the 5v from a mirco usb. For the amp I've been looking at the LM386 family of op amps but am confused what Vs is, not really a big problem (I hope) just can't figure out what its for.
{url=http://valid.canardpc-com/2297241}{img}http://valid.canardpc-com/cache/banner/2297241.png{/img}{/url}
| CPU: Phenom X4 965BE @3.8ghz |
| M/B: ASrock 970de3/u3s3 |
| RAM: 16GB Corsair Dominator Platinum |
| GPU: MSI 660TI Power Edition |
|
|
Re: Anyone good with ICs?
This one should be more helpful for you.
Any sufficiently advanced technology is indistinguishable from magic.......... Arthur C. ClarkeA+ Certified. Dell, Lenovo, HP, Lexmarks, Xerox, Panasonic and NEC Certified ASP.
| CPU: i7-980, 6 cores, 12 threads, 4.5 GHz |
| M/B: Asus P6X58-E Pro |
| RAM: 24GB (6 x 4GB), G.Skill Ripsaw, DDR3-1600, 1730 MHz |
| GPU: 2x Sapphire Radeon HD 6950, 2GB, 880/1375 & 800/1250, Unlocked shaders on one |
|
|
Re: Anyone good with ICs?
OH so it's just the power for the chip, awesome. Tanks!
{url=http://valid.canardpc-com/2297241}{img}http://valid.canardpc-com/cache/banner/2297241.png{/img}{/url}
| CPU: Phenom X4 965BE @3.8ghz |
| M/B: ASrock 970de3/u3s3 |
| RAM: 16GB Corsair Dominator Platinum |
| GPU: MSI 660TI Power Edition |
|
|
Re: Anyone good with ICs?
BTW the "Vs" in some of the other drawings is the Audio Signal in. + and -. If you look at them the "Vs" had the same symbol as the main postive power in.
Any sufficiently advanced technology is indistinguishable from magic.......... Arthur C. ClarkeA+ Certified. Dell, Lenovo, HP, Lexmarks, Xerox, Panasonic and NEC Certified ASP.
PoLoMoTo (08-03-2013)
| CPU: Intel i7 2600K |
| M/B: ASUS P8Z68 Deluxe |
| RAM: G.Skill Ripjaws DDR3-1600 PC3-12800 |
| GPU: MSI N460GTX Hawk |
|
|
Re: Anyone good with ICs?
Take a look here, all the work is done.
Low Voltage Audio Amplifier Module Kit NJM386D LM386 | eBay
PoLoMoTo (09-03-2013)
| CPU: i7 980X |
| M/B: asus rampage black edition III |
| RAM: CORSAIR DOMINATOR PLATINUM 16GB 2133 |
| GPU: asus580 directcuIII 1536 MB GDDR5 / 782HZ OVERCLOCK |
|
|
Re: Anyone good with ICs?
That is how I would do it.
| CPU: Core i7 920 C0 @ 4GHz 1.24V |
| M/B: ASUS P6T <Green> |
| RAM: 24GB Visiontek @ 1500MHz 1T |
| GPU: MSI Radeon HD 6970 Lightning 2GB |
|
|
Re: Anyone good with ICs?
I read this and don't understand a thing! Can't wait for college! XD
"Gave you all I had to give, Found a place for me to rest my head"- R.I.P Jimmy "The Rev" Sullivan
| CPU: i7-980, 6 cores, 12 threads, 4.5 GHz |
| M/B: Asus P6X58-E Pro |
| RAM: 24GB (6 x 4GB), G.Skill Ripsaw, DDR3-1600, 1730 MHz |
| GPU: 2x Sapphire Radeon HD 6950, 2GB, 880/1375 & 800/1250, Unlocked shaders on one |
|
|
Re: Anyone good with ICs?
It isn't too bad, I'm 16. I pretend to understand it XDXD but really this chip especially after reading data sheets is pretty simpleOriginally Posted by criss_glitch666
{url=http://valid.canardpc-com/2297241}{img}http://valid.canardpc-com/cache/banner/2297241.png{/img}{/url}
| CPU: i7-980, 6 cores, 12 threads, 4.5 GHz |
| M/B: Asus P6X58-E Pro |
| RAM: 24GB (6 x 4GB), G.Skill Ripsaw, DDR3-1600, 1730 MHz |
| GPU: 2x Sapphire Radeon HD 6950, 2GB, 880/1375 & 800/1250, Unlocked shaders on one |
|
|
Re: Anyone good with ICs?
But thats cheating :P
{url=http://valid.canardpc-com/2297241}{img}http://valid.canardpc-com/cache/banner/2297241.png{/img}{/url}
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
