motherboards
Page 1 of 2 1 2 LastLast
Results 1 to 16 of 18

Thread: Working on my first build...

  1. #1
    New Member

    Status
    AzulSteel is offline

    Last Online
    06-12-2016 @ 18:36
    Join Date
    Nov 2016
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Points: 82, Level: 1
    Points: 82, Level: 1
    Level completed: 32%,
    Points required for next Level: 68
    Level completed: 32%, Points required for next Level: 68
    Overall activity: 56.0%
    Overall activity: 56.0%

    Default Working on my first build...

    Hey guys, wanted to try to build me a PC. Being a newbie at it was hoping you could give some pointers. The parts i'm considering using are listed below.


    ASUS Z170-P LGA 1151 Intel Z170 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard


    EVGA SuperNOVA 850 G2 220-G2-0850-XR 80+ GOLD 850W Fully Modular EVGA ECO Mode Includes FREE Power On Self Tester Power Supply


    Intel Core i5-6500 6MB Skylake Quad-Core 3.2 GHz LGA 1151 65W BX80662I56500 Desktop Processor Intel HD Graphics 530


    SAMSUNG 850 EVO 2.5" 250GB SATA III 3-D Vertical Internal Solid State Drive (SSD) MZ-75E250B/AM


    G.SKILL TridentZ Series 16GB (2 x 8G 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Intel Z170 Platform / Intel X99 Platform Desktop Memory Model F4-3200C16D-16GTZB



    WD Black 1TB Performance Desktop Hard Disk Drive - 7200 RPM SATA 6 Gb/s 64MB Cache 3.5 Inch - WD1003FZEX



    PNY GeForce GTX 1060 DirectX 12 VCGGTX10606PB 6GB 192-Bit GDDR5 PCI Express 3.0 Video Card



    I'm going for a cheaper build, the original price at about $800. This list is around $950 and don't even have the tower yet. But I was wondering if the parts listed will work together well or if they're not balanced well. Thanks for reading, have a good one!

  2. #2
    Moderator

    Status
    Smiki007 is offline

    Last Online
    Today @ 16:40
    Join Date
    Apr 2011
    Location
    Lima, Peru
    Posts
    2,313
    CPU: i7 3970x @ 5.0GHz
    M/B: Rampage IV Black Edition
    RAM: Kingston HuperX Beast @2400MHz (64GB)
    GPU: 2SLI EVGA GTX 780 + EK WB
    • Smiki007's Full Spec's
      • Case:
      • Thermaltake Core X9
      • PSU:
      • MaxRevo 1350W 80+ Gold
      • Cooling:
      • Swiftech (APOGEE HD Black CPU WB + 2x MCP655 PWM Pump + 2x MCR320-XP Rad) + Phobya Balancer 150 Res + Masterkleer tubing (black/white)
      • Monitor:
      • ASUS VG278H 3D
      • OS:
      • W7 Professional x64 SP1
    Thanks
    224
    Thanked 275 Times in 245 Posts
    Points: 70,167, Level: 82
    Points: 70,167, Level: 82
    Level completed: 25%,
    Points required for next Level: 1,283
    Level completed: 25%, Points required for next Level: 1,283
    Overall activity: 99.8%
    Overall activity: 99.8%

    Default Re: Working on my first build...

    It looks good, only as you don't need 850W PS for one GTX 1060, you can go for EVGA 650W P2 (is US$30 cheaper than 850 G2), and with that difference, you can go for EVGA GTX 1060 6GB SSC GPU.
    Amazon Prices:
    https://www.amazon.com/EVGA-SuperNOV.../dp/B010HWDPKW
    https://www.amazon.com/EVGA-GeForce-...01LYN9KK6?th=1

    NewEgg Prices:
    EVGA SuperNOVA 650 P2 220-P2-0650-X1 80+ PLATINUM 650W Fully Modular EVGA ECO Mode Includes FREE Power On Self Tester Power Supply-Newegg.com
    EVGA GeForce GTX 1060 6GB SSC GAMING ACX 3.0, 6GB GDDR5, LED, DX12 OSD Support (PXOC), 06G-P4-6267-KR-Newegg.com

    PS. to PureOC.

    Always look beyond the limits...

  3. #3
    New Member

    Status
    AzulSteel is offline

    Last Online
    06-12-2016 @ 18:36
    Join Date
    Nov 2016
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Points: 82, Level: 1
    Points: 82, Level: 1
    Level completed: 32%,
    Points required for next Level: 68
    Level completed: 32%, Points required for next Level: 68
    Overall activity: 56.0%
    Overall activity: 56.0%

    Default Re: Working on my first build...

    Quote Originally Posted by Smiki007 View Post
    It looks good, only as you don't need 850W PS for one GTX 1060, you can go for EVGA 650W P2 (is US$30 cheaper than 850 G2), and with that difference, you can go for EVGA GTX 1060 6GB SSC GPU.
    Amazon Prices:
    https://www.amazon.com/EVGA-SuperNOV.../dp/B010HWDPKW
    https://www.amazon.com/EVGA-GeForce-...01LYN9KK6?th=1

    NewEgg Prices:
    EVGA SuperNOVA 650 P2 220-P2-0650-X1 80+ PLATINUM 650W Fully Modular EVGA ECO Mode Includes FREE Power On Self Tester Power Supply-Newegg.com
    EVGA GeForce GTX 1060 6GB SSC GAMING ACX 3.0, 6GB GDDR5, LED, DX12 OSD Support (PXOC), 06G-P4-6267-KR-Newegg.com

    PS. to PureOC.
    Okay, cool! So I was looking at towers and will any ATX tower work for this set up or do I have to get a certain brand and size? Also I wanted to go for the blue led look but the reviews on the stock fans usually are bad. Do you know of a good one or should I just go for a different tower setup?

  4. #4
    Regular Member

    Status
    joshjaks is online now

    Last Online
    Today @ 19:27
    Join Date
    Nov 2012
    Location
    Rangely, CO
    Posts
    1,029
    CPU: FX / 8350 / AMD / 4.7Ghz OC
    M/B: Asus Crosshair V Formula-Z
    RAM: 16gb / Corsair / Vengeance / 1866 / 9-10-9-27
    GPU: Sapphire / R9 290 Vapor-X / 4gb / x 2 Crossfire
    • joshjaks's Full Spec's
      • Case:
      • NZXT Phantom 820
      • PSU:
      • Rosewill / Lightning / 1000w
      • Cooling:
      • Proc / Corsair H110i GTX Fans / 4x NZXT 200mm Front, Side and Top/ Rear / 2 x Corsair AF140mm Purple LED GPU / Stock (Vapor-X)
      • Monitor:
      • Acer 27" LED
      • OS:
      • Windows 8.1
    Thanks
    191
    Thanked 117 Times in 89 Posts
    Points: 13,485, Level: 35
    Points: 13,485, Level: 35
    Level completed: 20%,
    Points required for next Level: 565
    Level completed: 20%, Points required for next Level: 565
    Overall activity: 99.6%
    Overall activity: 99.6%

    Default Re: Working on my first build...

    Yeah Smiki has some great tweaks for ya, but overall your list looks excellent! Welcome to the forums and when you get your rig together, get us some pictures.
    Bench System: CPU - AMD FX-8350 / Mobo - MSI 990FXA Gaming / Video Card - MSI Radeon HD7770 / Memory - 8gb Gskill Sniper DDR3 1600 9-9-9-24 / Harddrive - Seagate Barracuda 250gb 7200 rpm x 2 Raid 0 / Power Supply - Seasonic X Gold 750w / Case - NZXT Noctis 450 White / CPU Cooler - Cooler Master Nepton 240m w/ 2x Cougar 120mm PWM Fans

  5. The following user thanks joshjaks For this above post:

    Smiki007 (08-11-2016)

  6. #5
    Moderator

    Status
    Smiki007 is offline

    Last Online
    Today @ 16:40
    Join Date
    Apr 2011
    Location
    Lima, Peru
    Posts
    2,313
    CPU: i7 3970x @ 5.0GHz
    M/B: Rampage IV Black Edition
    RAM: Kingston HuperX Beast @2400MHz (64GB)
    GPU: 2SLI EVGA GTX 780 + EK WB
    • Smiki007's Full Spec's
      • Case:
      • Thermaltake Core X9
      • PSU:
      • MaxRevo 1350W 80+ Gold
      • Cooling:
      • Swiftech (APOGEE HD Black CPU WB + 2x MCP655 PWM Pump + 2x MCR320-XP Rad) + Phobya Balancer 150 Res + Masterkleer tubing (black/white)
      • Monitor:
      • ASUS VG278H 3D
      • OS:
      • W7 Professional x64 SP1
    Thanks
    224
    Thanked 275 Times in 245 Posts
    Points: 70,167, Level: 82
    Points: 70,167, Level: 82
    Level completed: 25%,
    Points required for next Level: 1,283
    Level completed: 25%, Points required for next Level: 1,283
    Overall activity: 99.8%
    Overall activity: 99.8%

    Always look beyond the limits...

  7. #6
    Moderator

    Status
    Smiki007 is offline

    Last Online
    Today @ 16:40
    Join Date
    Apr 2011
    Location
    Lima, Peru
    Posts
    2,313
    CPU: i7 3970x @ 5.0GHz
    M/B: Rampage IV Black Edition
    RAM: Kingston HuperX Beast @2400MHz (64GB)
    GPU: 2SLI EVGA GTX 780 + EK WB
    • Smiki007's Full Spec's
      • Case:
      • Thermaltake Core X9
      • PSU:
      • MaxRevo 1350W 80+ Gold
      • Cooling:
      • Swiftech (APOGEE HD Black CPU WB + 2x MCP655 PWM Pump + 2x MCR320-XP Rad) + Phobya Balancer 150 Res + Masterkleer tubing (black/white)
      • Monitor:
      • ASUS VG278H 3D
      • OS:
      • W7 Professional x64 SP1
    Thanks
    224
    Thanked 275 Times in 245 Posts
    Points: 70,167, Level: 82
    Points: 70,167, Level: 82
    Level completed: 25%,
    Points required for next Level: 1,283
    Level completed: 25%, Points required for next Level: 1,283
    Overall activity: 99.8%
    Overall activity: 99.8%

    Default Re: Working on my first build...

    Quote Originally Posted by joshjaks View Post
    ...when you get your rig together, get us some pictures.
    Amen to that.

    Always look beyond the limits...

  8. #7
    Gu3
    Regular Member

    Status
    Gu3 is offline

    Last Online
    Yesterday @ 14:46
    Join Date
    Dec 2014
    Location
    Centreville VA, USA
    Posts
    941
    CPU: i7-4770K @ 4GHZ
    M/B: MSI Z87 MPOWER ATX LGA1150
    RAM: 32GB (2 X Crucial 16GB Ballistix Elite (2 x 8GB) CAS 9, DDR3 1866 )
    GPU: EVGA GeForce GTX 760 4GB Dual FTW ACX
    • Gu3's Full Spec's
      • Case:
      • Fractal Design Define R4 Blackout
      • PSU:
      • Seasonic XPS2 / 660W / 660 Platinum
      • Cooling:
      • Swiftech ApogeeXL Water Block Alphacool NexXxos ST30 Full Copper Slim Profile Dual 120mm Radiator EK DDC X-RES Top 140 with 3.2 Pump (PWM) Pump/Res Primochill LST 3/8x5/16" Tubing BitsPower Premium Black Matt Compression Fittings Cougar CF-V12HPB Fans Monsoon Silver Bullet
      • Monitor:
      • 3 x Asus VS247H-P 23.6"
      • OS:
      • Linux Mint 18.1
      • Misc:
      • System Name: Dark Matter Build: http://pcpartpicker.com/b/rrccCJ BIOS Overclock to 4GHZ. Memory @ Stock Speed. Purely an amateur, built for HandBrake.
    Thanks
    91
    Thanked 110 Times in 101 Posts
    Points: 5,114, Level: 21
    Points: 5,114, Level: 21
    Level completed: 13%,
    Points required for next Level: 436
    Level completed: 13%, Points required for next Level: 436
    Overall activity: 86.0%
    Overall activity: 86.0%

    Default Re: Working on my first build...

    Quote Originally Posted by Smiki007 View Post
    Amen to that.
    And I'll second Smiki's comments on the Fans (Cougars rock) and the Power Supply. A good way to get an idea of PSU needs it to use the PCPartpicker.com tool to build your PC, keep an eye on the power requirements, and size your power supply based on that. This is cool, because you can add things you MIGHT want to install later (second Graphics card, More RAM, more SSD's, more fans, etc) and use the wattage number to select a PSU.

    In my experience, it's very rare that most users would ever need more than 650 Watts for a PSU. A good Gold rated PSU running at < 60 % of full load should sustain most modern PC builds. Adding multiple High End graphics cards, or a LOT of RAM might push you up in the 750-850 range (RAM actually uses a surprising amount of current). 1KW PSU's are for the really heavy stuff, and are likely quite often run at <50% of capacity. Note, I love the EVGA's, but keep an eye out for Seasonics on sale as well.

    PCPartpicker is also a good place to do Video Card comparisons, and as Smiki pointed out, the EVGA's are a popular choice around here and are hard to beat in terms of bang for your buck, cooling noise, and performance.

    Great start! Good luck!

    S.

  9. #8
    Core Member

    Status
    killjoyjim is offline

    Last Online
    26-02-2017 @ 22:41
    Join Date
    Dec 2011
    Location
    corry pa
    Posts
    4,844
    CPU: INTEL i5 4670k
    M/B: ASUS MAXIMUS VII HERO
    RAM: CORSAIR DOMINATOR PLATINUM 16GB 2133
    GPU: Two GIGABYTE 670. With EXPC waterblocks and back plats.
    • killjoyjim's Full Spec's
      • Case:
      • Case Labs Magnum TH 10. With custom paint.
      • PSU:
      • AZZA TITAN 1000w
      • Cooling:
      • D5 pump with dress up kit and block. Custom Res with three XSPC 480mm rads. Swifteck CPU block and Two XSPC water blocks on my 670 cards.
      • Sound:
      • ASUS ROG THUNDERBOLT
      • Monitor:
      • 47'' samsung tv
      • OS:
      • windows 7
      • Misc:
      • OCZ 60gb fot OS. And a OCZ 240 ssd.
    Thanks
    30
    Thanked 415 Times in 377 Posts
    Points: 61,980, Level: 77
    Points: 61,980, Level: 77
    Level completed: 21%,
    Points required for next Level: 1,270
    Level completed: 21%, Points required for next Level: 1,270
    Overall activity: 18.0%
    Overall activity: 18.0%

    Default Re: Working on my first build...

    Looks like a hell of a build. Have fun.Take your time. Ane send pick's..
    Also.
    WELCOME TO PURE OC...

  10. #9
    New Member

    Status
    AzulSteel is offline

    Last Online
    06-12-2016 @ 18:36
    Join Date
    Nov 2016
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Points: 82, Level: 1
    Points: 82, Level: 1
    Level completed: 32%,
    Points required for next Level: 68
    Level completed: 32%, Points required for next Level: 68
    Overall activity: 56.0%
    Overall activity: 56.0%

    Default Re: Working on my first build...

    Thanks guys! I'm going to stick with the list I made. I've started getting parts and hope to have it up and going soon! I'll get pics once it's all ready. Thanks so much for the help!

  11. #10
    Member

    Status
    Bones is offline

    Last Online
    04-02-2017 @ 07:05
    Join Date
    Jul 2016
    Location
    Wetumpka AL.
    Posts
    42
    CPU: FX 8300
    M/B: CHV-Z
    RAM: Corsair Vengeance
    GPU: Asus Strix R9 380X
    Thanks
    4
    Thanked 7 Times in 6 Posts
    Points: 597, Level: 6
    Points: 597, Level: 6
    Level completed: 24%,
    Points required for next Level: 153
    Level completed: 24%, Points required for next Level: 153
    Overall activity: 0%
    Overall activity: 0%

    Default Re: Working on my first build...

    Looks good - I too would stick with the PSU you have selected since it's viable for any future upgrades including more powerful pieces you might want to add/swap out for later.

    Tried to look up the board and believe it has an M.2 slot, I'd look into one of those if the one you want has it and suggest one of the Samsung/OCZ drives for it. The Hyper drives are good too, in fact the Samsung, OCZ and Hyper drives are currently the best out there ATM for an M.2 drive. Only real drawback is paying for it.

  12. #11
    New Member

    Status
    AzulSteel is offline

    Last Online
    06-12-2016 @ 18:36
    Join Date
    Nov 2016
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Points: 82, Level: 1
    Points: 82, Level: 1
    Level completed: 32%,
    Points required for next Level: 68
    Level completed: 32%, Points required for next Level: 68
    Overall activity: 56.0%
    Overall activity: 56.0%

    Default Re: Working on my first build...

    Hey guys! So what thermal paste is the best to use and I've got to spread it evenly right? No bubbles or anything. Is it best to just put a drop in the middle or is there a better way? Thanks!

  13. #12
    Regular Member

    Status
    joshjaks is online now

    Last Online
    Today @ 19:27
    Join Date
    Nov 2012
    Location
    Rangely, CO
    Posts
    1,029
    CPU: FX / 8350 / AMD / 4.7Ghz OC
    M/B: Asus Crosshair V Formula-Z
    RAM: 16gb / Corsair / Vengeance / 1866 / 9-10-9-27
    GPU: Sapphire / R9 290 Vapor-X / 4gb / x 2 Crossfire
    • joshjaks's Full Spec's
      • Case:
      • NZXT Phantom 820
      • PSU:
      • Rosewill / Lightning / 1000w
      • Cooling:
      • Proc / Corsair H110i GTX Fans / 4x NZXT 200mm Front, Side and Top/ Rear / 2 x Corsair AF140mm Purple LED GPU / Stock (Vapor-X)
      • Monitor:
      • Acer 27&quot; LED
      • OS:
      • Windows 8.1
    Thanks
    191
    Thanked 117 Times in 89 Posts
    Points: 13,485, Level: 35
    Points: 13,485, Level: 35
    Level completed: 20%,
    Points required for next Level: 565
    Level completed: 20%, Points required for next Level: 565
    Overall activity: 99.6%
    Overall activity: 99.6%

    Default Re: Working on my first build...

    Quote Originally Posted by AzulSteel View Post
    Hey guys! So what thermal paste is the best to use and I've got to spread it evenly right? No bubbles or anything. Is it best to just put a drop in the middle or is there a better way? Thanks!
    GC Gelid Extreme. Use a center dot and let the pressure from the cold plate evenly spread it.
    Bench System: CPU - AMD FX-8350 / Mobo - MSI 990FXA Gaming / Video Card - MSI Radeon HD7770 / Memory - 8gb Gskill Sniper DDR3 1600 9-9-9-24 / Harddrive - Seagate Barracuda 250gb 7200 rpm x 2 Raid 0 / Power Supply - Seasonic X Gold 750w / Case - NZXT Noctis 450 White / CPU Cooler - Cooler Master Nepton 240m w/ 2x Cougar 120mm PWM Fans

  14. #13
    Moderator

    Status
    vinman is offline

    Last Online
    Yesterday @ 00:11
    Join Date
    Feb 2010
    Location
    Los Angeles Orange Cty
    Posts
    4,184
    CPU: Intel Core i7 - 4770K
    M/B: MSI Z87 MPOWER
    RAM: 32 GB DDR3 2400 G.SKILL SNIPER
    GPU: 2X- EVGA GFORCE GTX 960 4GB FTW
    • vinman's Full Spec's
      • Case:
      • Phanteks Enthoo Lux
      • PSU:
      • EVGA SUPERNOVA P2 PLATNIUM 1200W PSU
      • Cooling:
      • AirPlex 360 rad Airplex Pro 240 slim rad Swiftech MCP 655 Pump XSPC RAYSTORM CPU Water Block Monsoon Premium Modular 2 bay Reservoir
      • Sound:
      • On Board
      • Monitor:
      • 27 inch BENQ HDMI
      • OS:
      • Win10 PRO 64bit
      • Misc:
      • GAMING G710 KEYBOARD, DM 1 Pro Gaming mouse
    Thanks
    1,240
    Thanked 609 Times in 488 Posts
    Points: 58,642, Level: 75
    Points: 58,642, Level: 75
    Level completed: 7%,
    Points required for next Level: 1,408
    Level completed: 7%, Points required for next Level: 1,408
    Overall activity: 49.0%
    Overall activity: 49.0%

    Default Re: Working on my first build...

    Quote Originally Posted by joshjaks View Post
    GC Gelid Extreme. Use a center dot and let the pressure from the cold plate evenly spread it.
    Great choice I second that and apply it the same way good luck with your build cant wait to see some pics!!

  15. #14
    New Member

    Status
    AzulSteel is offline

    Last Online
    06-12-2016 @ 18:36
    Join Date
    Nov 2016
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Points: 82, Level: 1
    Points: 82, Level: 1
    Level completed: 32%,
    Points required for next Level: 68
    Level completed: 32%, Points required for next Level: 68
    Overall activity: 56.0%
    Overall activity: 56.0%

    Default Re: Working on my first build...

    Thanks guys! Got all the parts ordered but I can't find a cd rom that is windows 10 compatible. Which one should I use? Thanks!

  16. #15
    Moderator

    Status
    vinman is offline

    Last Online
    Yesterday @ 00:11
    Join Date
    Feb 2010
    Location
    Los Angeles Orange Cty
    Posts
    4,184
    CPU: Intel Core i7 - 4770K
    M/B: MSI Z87 MPOWER
    RAM: 32 GB DDR3 2400 G.SKILL SNIPER
    GPU: 2X- EVGA GFORCE GTX 960 4GB FTW
    • vinman's Full Spec's
      • Case:
      • Phanteks Enthoo Lux
      • PSU:
      • EVGA SUPERNOVA P2 PLATNIUM 1200W PSU
      • Cooling:
      • AirPlex 360 rad Airplex Pro 240 slim rad Swiftech MCP 655 Pump XSPC RAYSTORM CPU Water Block Monsoon Premium Modular 2 bay Reservoir
      • Sound:
      • On Board
      • Monitor:
      • 27 inch BENQ HDMI
      • OS:
      • Win10 PRO 64bit
      • Misc:
      • GAMING G710 KEYBOARD, DM 1 Pro Gaming mouse
    Thanks
    1,240
    Thanked 609 Times in 488 Posts
    Points: 58,642, Level: 75
    Points: 58,642, Level: 75
    Level completed: 7%,
    Points required for next Level: 1,408
    Level completed: 7%, Points required for next Level: 1,408
    Overall activity: 49.0%
    Overall activity: 49.0%

    Default Re: Working on my first build...

    Dont you mean a DVD CD writer? if so here is a great buy and a very reliable drive

    LG Electronics Internal Super Multi Drive Optical Drives GH24NSC0B

    https://www.amazon.com/LG-Electronic...2%3A1248879011


    Half-height Internal Super Multi Drive, Max. 24X DVD-R Write Speed
    CD-R/RW, DVD-R/RW/RAM/ +R/RW +/-R DL M-DISC/+M SL read and write compatible, CD Family and DVD-ROM read compatible.
    SATA interface
    Large buffer memory 0.5MB
    Buffer Under-run prevention function embedded

  17. #16
    New Member

    Status
    AzulSteel is offline

    Last Online
    06-12-2016 @ 18:36
    Join Date
    Nov 2016
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Points: 82, Level: 1
    Points: 82, Level: 1
    Level completed: 32%,
    Points required for next Level: 68
    Level completed: 32%, Points required for next Level: 68
    Overall activity: 56.0%
    Overall activity: 56.0%

    Default Re: Working on my first build...

    Thank you so much for your help guys! Finely got all the parts and have it built. Only one problem. It says the driver for my graphics card is not compatible with this version of windows. My specs are listed in the first post. I'm using windows 10 home, 64 bit. I'll have pictures up soon! Thanks guys!

Page 1 of 2 1 2 LastLast

Remove Ads

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Working with hardware before you build
    By vinman in forum General Hardware
    Replies: 1
    Last Post: 19-07-2014, 08:58
  2. Ever stripped a screw while working on your build? Here's how to solve it...
    By shattered.likeness in forum General Discussion
    Replies: 18
    Last Post: 28-09-2011, 22:52
  3. Is my CF working as intended?
    By wish^ in forum Graphics Cards
    Replies: 5
    Last Post: 30-01-2011, 17:04
  4. Linux not working
    By Fuzzin in forum General Software
    Replies: 0
    Last Post: 13-09-2008, 21:03
  5. Can anyone help me about Steam not working?
    By !Devastator in forum PC Games
    Replies: 2
    Last Post: 26-11-2007, 13:35

Search tags for this page

There are currently no search tags.
Click on a term to search for related topics.

Tags for this Thread