Voltage warnings

[SamCR3]

Keep getting these warning over the past few days. Anyone know why? Jim suggested it may be my oc, but it seems so unrelated and I increased both my vocre and cpu/nb per his instructions. Wondering if my PSU is bad or if it's just the crappy electrical in my house.

[Drdeath]

You can test the voltage on the PSU with a muli meter. It is a good tool to have around with all the timkering you do. You can get a decent one at Lowes or depot for $40 but it is promambly your overclock. Take screenies of the bios on a flash drive by hitting F12 in the bios and post them here. We will take a look th the settings.

[SamCR3]

Ok. Thanks, Jim. I'll get them up a little later. My son just woke up so it's off to take care of a toddler.

[PoLoMoTo]

AI suit always alerts me that some voltage has hit 0v but when I check its always normal

[SamCR3]

Here is the Bios as it stands right now. I backed off the vcore 1 notch and reset the CPU/NB to auto after I got the voltage warnings. Sorry to keep bothering you with this Jim; I'm having a tough timing finding a stable oc and am not sure what I'm doing wrong. I appreciate your help and patience with me as I learn.

[SamCR3]

Bump

[Drdeath]

Ok here are some voltage perameters I used on the FX-8150 but remember, I use custom water. I used 1.55-1.6V on the CPU, 1.3-1.35 on the CPU/NB. I bumped the NB to 1.2V although I left NB at auto. Your cool n quiet and pstates look fine. Leave memory at default like mentioned and all other voltages on auto. Take your LLC up to max and just monitor temps. I stay under 55 but up to 60 under load is fine..... let us know

Gotta love the F12 feature on Asus and Asrock boards.

[SamCR3]

Yeah, the F12 feature is awesome.

There is no way I will be able to push vcore that high with my current cooling. Anything over 1.4v and I go over 60 C. What I haven't done is played around too much with the CPU/NB volts. Will give that a try.

Thanks for the help Jim. I am really seeing what you mean when you said that finding a stable oc is trial and error. And by stable I mean 6 plus hours of Prime95. I'll keep working at this and let you know how it goes. New thermal compound on my 550LC should help with temps and allow me to push more vcore too. Will get to that in the next day or so.

Thanks again. Much appreciated.

[SamCR3]

Please close this thread. I copied the posts over to another thread related to my FX build to avoid confusion. Thanks.