LinkBack URL
About LinkBackshey guys
so i got gtx 590 and i want to install another card and keep to physx so i could use all 3gb vram of 590 !!
any ideas ??
|
|
| CPU: intel i7 950 @ 3.88 |
| M/B: Gigabyte X58A-UD3R |
| RAM: 24 GB DDR3 1600mhz KINGMAX |
| GPU: zotac gtx 590 |
|
|
Gpu for physx ?!!
hey guys
so i got gtx 590 and i want to install another card and keep to physx so i could use all 3gb vram of 590 !!
any ideas ??
| CPU: Core i7 3930K |
| M/B: ASRock X79 Extreme9 |
| RAM: 64GBs Kingston Beast 2133MHz |
| GPU: Two EVGA GTX 690s |
|
|
Re: Gpu for physx ?!!
GTX 560 Ti OC
2nd system
ASRock Z77 OC Formula, 2700K, Two EVGA GTX680s, and one GTX660 Ti PE, 16GBs 2133MHz, Lian Li A75X , Maxrevo 1500W, TT Extreme 240
3rd system
ASUS ROG X79 Rampage 4 Formula, 3930K, Boreas Chiller, VisionTek 480GB, WD 750GB, 16GBs Kingston HyperX Red 1600MHz, Two GTX680s, OCZ 1250W, CM Stryker modded for the Boreas Chiller, 3 white Skull fans grills from MNPCTech.
.
| CPU: intel i7 950 @ 3.88 |
| M/B: Gigabyte X58A-UD3R |
| RAM: 24 GB DDR3 1600mhz KINGMAX |
| GPU: zotac gtx 590 |
|
|
Re: Gpu for physx ?!!
it won't drag the performance down ??
| CPU: intel i7 950 @ 3.88 |
| M/B: Gigabyte X58A-UD3R |
| RAM: 24 GB DDR3 1600mhz KINGMAX |
| GPU: zotac gtx 590 |
|
|
Re: Gpu for physx ?!!
| CPU: Core i7 3930K |
| M/B: ASRock X79 Extreme9 |
| RAM: 64GBs Kingston Beast 2133MHz |
| GPU: Two EVGA GTX 690s |
|
|
Re: Gpu for physx ?!!
Where are you located ? if you can buy a EVGA GTX560 it would be the better choice, all EVGA cards come with a limited lifetime warranty, plus their RMA and Support dept is the best around.
2nd system
ASRock Z77 OC Formula, 2700K, Two EVGA GTX680s, and one GTX660 Ti PE, 16GBs 2133MHz, Lian Li A75X , Maxrevo 1500W, TT Extreme 240
3rd system
ASUS ROG X79 Rampage 4 Formula, 3930K, Boreas Chiller, VisionTek 480GB, WD 750GB, 16GBs Kingston HyperX Red 1600MHz, Two GTX680s, OCZ 1250W, CM Stryker modded for the Boreas Chiller, 3 white Skull fans grills from MNPCTech.
.
| CPU: intel i7 950 @ 3.88 |
| M/B: Gigabyte X58A-UD3R |
| RAM: 24 GB DDR3 1600mhz KINGMAX |
| GPU: zotac gtx 590 |
|
|
Re: Gpu for physx ?!!
oh i live in middle east
we got shops here that sell gtx 580 and above only older cards are impossible to find
| CPU: intel i7 950 @ 3.88 |
| M/B: Gigabyte X58A-UD3R |
| RAM: 24 GB DDR3 1600mhz KINGMAX |
| GPU: zotac gtx 590 |
|
|
Re: Gpu for physx ?!!
this is the card i got to handle physx
http://www.amazon.com/GeForce-Express-Dual-Link-Graphics-ZT-50709-10M/dp/B005MN2QWK
i hope it won't increase the heat inside
| CPU: i7-2600K and i7-870 |
| M/B: ASRock Z68 Extreme 7 Gen-3 and ASRock P55 Pro-3 |
| RAM: 16GB Mushkin Redline 2133 & 16GB GSKill Sniper 2133 |
| GPU: Two GTX570's in SLI & XFX-7770 1GB |
|
|
Re: Gpu for physx ?!!
The brand matches the card you already have, so it will look good. Just having the second card in the case will produce a little more heat. That's unavoidable.
If you have good air flow through your case it will not matter. Do you have enough PCI-E connectors for the second card on that Power Supply?
| CPU: intel i7 950 @ 3.88 |
| M/B: Gigabyte X58A-UD3R |
| RAM: 24 GB DDR3 1600mhz KINGMAX |
| GPU: zotac gtx 590 |
|
|
Re: Gpu for physx ?!!
i have a good airflow and i can install 3 gpu's at once ( 3 slots available )
however 590 is big enough to cover the other gpu slot :P but the last gpu slot happens to lay on top of the PSU so i can't install 560 yet , i'm going to pay a visit to the local pc shop to fix this whole thing
hopefully it'll work smoothly without any driver problems
| CPU: Core i7 3930K |
| M/B: ASRock X79 Extreme9 |
| RAM: 64GBs Kingston Beast 2133MHz |
| GPU: Two EVGA GTX 690s |
|
|
Re: Gpu for physx ?!!
You shouldn't have any driver problems. just make sure you go into the Nvidia control panel and check the 560 to be used for Phys X.
2nd system
ASRock Z77 OC Formula, 2700K, Two EVGA GTX680s, and one GTX660 Ti PE, 16GBs 2133MHz, Lian Li A75X , Maxrevo 1500W, TT Extreme 240
3rd system
ASUS ROG X79 Rampage 4 Formula, 3930K, Boreas Chiller, VisionTek 480GB, WD 750GB, 16GBs Kingston HyperX Red 1600MHz, Two GTX680s, OCZ 1250W, CM Stryker modded for the Boreas Chiller, 3 white Skull fans grills from MNPCTech.
.
| CPU: i7-2600K and i7-870 |
| M/B: ASRock Z68 Extreme 7 Gen-3 and ASRock P55 Pro-3 |
| RAM: 16GB Mushkin Redline 2133 & 16GB GSKill Sniper 2133 |
| GPU: Two GTX570's in SLI & XFX-7770 1GB |
|
|
Re: Gpu for physx ?!!
Once you've stipulated in NVIDIA Control Panel that the 560 is ~dedicated~ to PhisX, it will work on it's own and will be automatic too.
Let us know how it turns out.
| CPU: intel i7 950 @ 3.88 |
| M/B: Gigabyte X58A-UD3R |
| RAM: 24 GB DDR3 1600mhz KINGMAX |
| GPU: zotac gtx 590 |
|
|
Re: Gpu for physx ?!!
got it working
i'll try batman AC and some physx benchmarks
| CPU: intel i7 950 @ 3.88 |
| M/B: Gigabyte X58A-UD3R |
| RAM: 24 GB DDR3 1600mhz KINGMAX |
| GPU: zotac gtx 590 |
|
|
Re: Gpu for physx ?!!
PLA benchmark
settings
results
| CPU: i7-2600K and i7-870 |
| M/B: ASRock Z68 Extreme 7 Gen-3 and ASRock P55 Pro-3 |
| RAM: 16GB Mushkin Redline 2133 & 16GB GSKill Sniper 2133 |
| GPU: Two GTX570's in SLI & XFX-7770 1GB |
|
|
Re: Gpu for physx ?!!
Looks like it works fine to me,.......
| CPU: intel i7 950 @ 3.88 |
| M/B: Gigabyte X58A-UD3R |
| RAM: 24 GB DDR3 1600mhz KINGMAX |
| GPU: zotac gtx 590 |
|
|
Re: Gpu for physx ?!!
this is batman AC benchmark
settings
res - 1080
dx11 + tes enabled - high
everythig is on with very high details
physx high + FXAA medium
results
i know the game isn't well optimized but i had to try it
Posting Permissions
Reply With Quote
